Packages

t

slick.jdbc.JdbcBackend

DatabaseFactoryDef

trait DatabaseFactoryDef extends AnyRef

Source
JdbcBackend.scala
Linear Supertypes
AnyRef, Any
Type Hierarchy
Ordering
  1. Alphabetic
  2. By Inheritance
Inherited
  1. DatabaseFactoryDef
  2. AnyRef
  3. Any
Implicitly
  1. by any2stringadd
  2. by StringFormat
  3. by Ensuring
  4. by ArrowAssoc
  1. Hide All
  2. Show All
Visibility
  1. Public
  2. Protected

Value Members

  1. final def !=(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  2. final def ##: Int
    Definition Classes
    AnyRef → Any
  3. def +(other: String): String
    Implicit
    This member is added by an implicit conversion from DatabaseFactoryDef toany2stringadd[DatabaseFactoryDef] performed by method any2stringadd in scala.Predef.
    Definition Classes
    any2stringadd
  4. def ->[B](y: B): (DatabaseFactoryDef, B)
    Implicit
    This member is added by an implicit conversion from DatabaseFactoryDef toArrowAssoc[DatabaseFactoryDef] performed by method ArrowAssoc in scala.Predef.
    Definition Classes
    ArrowAssoc
    Annotations
    @inline()
  5. final def ==(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  6. final def asInstanceOf[T0]: T0
    Definition Classes
    Any
  7. def clone(): AnyRef
    Attributes
    protected[lang]
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.CloneNotSupportedException]) @HotSpotIntrinsicCandidate() @native()
  8. def ensuring(cond: (DatabaseFactoryDef) => Boolean, msg: => Any): DatabaseFactoryDef
    Implicit
    This member is added by an implicit conversion from DatabaseFactoryDef toEnsuring[DatabaseFactoryDef] performed by method Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  9. def ensuring(cond: (DatabaseFactoryDef) => Boolean): DatabaseFactoryDef
    Implicit
    This member is added by an implicit conversion from DatabaseFactoryDef toEnsuring[DatabaseFactoryDef] performed by method Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  10. def ensuring(cond: Boolean, msg: => Any): DatabaseFactoryDef
    Implicit
    This member is added by an implicit conversion from DatabaseFactoryDef toEnsuring[DatabaseFactoryDef] performed by method Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  11. def ensuring(cond: Boolean): DatabaseFactoryDef
    Implicit
    This member is added by an implicit conversion from DatabaseFactoryDef toEnsuring[DatabaseFactoryDef] performed by method Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  12. final def eq(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  13. def equals(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef → Any
  14. def forConfig(path: String, config: Config = null, driver: Driver = null, classLoader: ClassLoader = ClassLoaderUtil.defaultClassLoader): Database

    Load a database configuration through Typesafe Config.

    Load a database configuration through Typesafe Config.

    The main config key to set is connectionPool. It determines the connection pool implementation to use. The default is HikariCP (a.k.a. slick.jdbc.hikaricp.HikariCPJdbcDataSource$) for HikariCP). This requires the "slick-hikaricp" dependency to be added to your project, in addition to "slick" itself. Use disabled (a.k.a. slick.jdbc.DataSourceJdbcDataSource$) to disable connection pooling and use a DataSource or the DriverManager directly. A third-party connection pool implementation can be selected by specifying the fully qualified name of an object implementing JdbcDataSourceFactory.

    The following config keys are supported for all connection pools, both built-in and third-party:

    • numThreads (Int, optional, default: 20): The number of concurrent threads in the thread pool for asynchronous execution of database actions. See the HikariCP wiki for more information about sizing the thread pool correctly. Note that for asynchronous execution in Slick you should tune the thread pool size (this parameter) accordingly instead of the maximum connection pool size.
    • queueSize (Int, optional, default: 1000): The size of the queue for database actions which cannot be executed immediately when all threads are busy. Beyond this limit new actions fail immediately. Set to 0 for no queue (direct hand-off) or to -1 for an unlimited queue size (not recommended).
    • registerMbeans (Boolean, optional, default: false): Whether or not JMX Management Beans ("MBeans") are registered. Slick supports an MBean of its own for monitoring the AsyncExecutor with the thread pool and queue, but connection pool implementations may register additional MBeans. In particular, HikariCP does this.
    • poolName (String, optional): A user-defined name for the connection pool in logging and JMX management consoles to identify pools and pool configurations. This defaults to the config path.

    The pool is tuned for asynchronous execution by default. Apart from the connection parameters you should only have to set numThreads and queueSize in most cases. In this scenario there is contention over the thread pool (via its queue), not over the connections, so you can have a rather large limit on the maximum number of connections (based on what the database server can still handle, not what is most efficient). Slick will use more connections than there are threads in the pool when sequencing non-database actions inside a transaction.

    The following config keys are supported for HikariCP:

    • Essentials:
    • dataSourceClass (String, optional): The name of the DataSource class provided by the JDBC driver. This is preferred over using driver. Note that url is ignored when this key is set (You have to use properties to configure the database connection instead).
    • jdbcUrl or url (String, required): JDBC URL
    • username or user (String, optional): User name
    • password (String, optional): Password
    • Frequently used:
    • autoCommit (Boolean, optional, default: true): controls the default auto-commit behavior of connections returned from the pool.
    • connectionTimeout (Duration, optional, default: 30s): The maximum number of milliseconds that a client (that's you) will wait for a connection from the pool. If this time is exceeded without a connection becoming available, a SQLException will be thrown. Lowest acceptable connection timeout is 250 ms
    • idleTimeout (Duration, optional, default: 10min): The maximum amount of time that a connection is allowed to sit idle in the pool. A value of 0 means that idle connections are never removed from the pool.
    • maxLifetime (Duration, optional, default: 30min): The maximum lifetime of a connection in the pool. When an idle connection reaches this timeout, even if recently used, it will be retired from the pool. A value of 0 indicates no maximum lifetime.
    • connectionTestQuery (String, optional): A statement that will be executed just before a connection is obtained from the pool to validate that the connection to the database is still alive. It is database dependent and should be a query that takes very little processing by the database (e.g. "VALUES 1"). When not set, the JDBC4 Connection.isValid() method is used instead (which is usually preferable).
    • minimumIdle or minConnections (Int, optional, default: same as numThreads): The minimum number of connections to keep in the pool.
    • maximumPoolSize or maxConnections (Int, optional, default: numThreads): The maximum number of connections in the pool.
    • Infrequently used:
    • initializationFailTimeout (Long, optional, default: 1): controls whether the pool will "fail fast" if the pool cannot be seeded with an initial connection successfully. Any positive number is taken to be the number of milliseconds to attempt to acquire an initial connection; the application thread will be blocked during this period. If a connection cannot be acquired before this timeout occurs, an exception will be thrown. This timeout is applied after the connectionTimeout period. If the value is zero (0), HikariCP will attempt to obtain and validate a connection. If a connection is obtained, but fails validation, an exception will be thrown and the pool not started. However, if a connection cannot be obtained, the pool will start, but later efforts to obtain a connection may fail. A value less than zero will bypass any initial connection attempt, and the pool will start immediately while trying to obtain connections in the background. Consequently, later efforts to obtain a connection may fail.
    • DEPRECATED:initializationFailFast (Boolean, optional, default: false): Controls whether the pool will "fail fast" if the pool cannot be seeded with initial connections successfully. If connections cannot be created at pool startup time, a RuntimeException will be thrown. This property has no effect if minConnections is 0.
    • isolateInternalQueries (Boolean, optional, default: false): determines whether HikariCP isolates internal pool queries, such as the connection alive test, in their own transaction. Since these are typically read-only queries, it is rarely necessary to encapsulate them in their own transaction. This property only applies if autoCommit is disabled.
    • allowPoolSuspension (Boolean, optional, default: false): controls whether the pool can be suspended and resumed through JMX. This is useful for certain failover automation scenarios. When the pool is suspended, calls to getConnection() will not timeout and will be held until the pool is resumed.
    • readOnly (Boolean, optional): Read Only flag for new connections.
    • catalog (String, optional): Default catalog for new connections.
    • connectionInitSql (String, optional): A SQL statement that will be executed after every new connection creation before adding it to the pool. If this SQL is not valid or throws an exception, it will be treated as a connection failure and the standard retry logic will be followed.
    • driver or driverClassName (String, optional): JDBC driver class to load
    • transactionIsolation or isolation (String, optional): Transaction isolation level for new connections. Allowed values are: NONE, READ_COMMITTED, READ_UNCOMMITTED, REPEATABLE_READ, SERIALIZABLE.
    • validationTimeout (Duration, optional, default: 5s): The maximum amount of time that a connection will be tested for aliveness. This value must be less than the connectionTimeout. Lowest acceptable validation timeout is 250 ms.
    • leakDetectionThreshold (Duration, optional, default: 0): The amount of time that a connection can be out of the pool before a message is logged indicating a possible connection leak. A value of 0 means leak detection is disabled. Lowest acceptable value for enabling leak detection is 10s.
    • schema (String, optional): Default catalog for new connections.
    • exceptionOverrideClassName (String, optional): SQLExceptionOverride class name
    • Driver or DataSource configuration:
    • properties (Map, optional): Properties to pass to the driver or DataSource.

    Direct connections are based on a java.sql.DataSource or a java.sql.Driver. This is determined by the presence or absence of the dataSourceClass config key. The following keys are supported for direct connections in DataSource mode:

    • dataSourceClass (String): The name of the DataSource class provided by the JDBC driver.
    • properties (Map, optional): Java Bean properties to set on the DataSource.

    The following keys are supported for direct connections in Driver mode:

    • url (String, required): JDBC URL
    • driver or driverClassName (String, optional): JDBC driver class to load. If not specified, the DriverManager is expected to already know how to handle the URL. Slick will check if the driver class is already registered before loading a new copy.
    • user (String, optional): User name
    • password (String, optional): Password
    • properties (Map, optional): Connection properties to pass to the driver.
    • deregisterDriver (Boolean, optional, default: false): If this is set to true and Slick loaded a JDBC driver when creating the Database object, it attempts to deregister that driver from the DriverManager when close() is called. Note that this may prevent the same driver from being registered again within the same ClassLoader through the usual automatic registration process.

    The following keys are supported for all direct connections:

    • isolation (String, optional): Transaction isolation level for new connections. Allowed values are: NONE, READ_COMMITTED, READ_UNCOMMITTED, REPEATABLE_READ, SERIALIZABLE.
    • catalog (String, optional): Default catalog for new connections.
    • readOnly (Boolean, optional): Read Only flag for new connections.
    • keepAliveConnection (Boolean, optional, default: false): If this is set to true, one extra connection will be opened as soon as the database is accessed for the first time, and kept open until close() is called. This is useful for named in-memory databases in test environments.

    Note that Driver mode is equivalent to using DataSource mode with a DriverDataSource and moving the config keys url, user, password, properties and driver / driverClassName down into the DataSource properties, except that DataSource mode always uses the default ClassLoader whereas Driver mode can be used with alternate ClassLoaders.

    Unknown keys are ignored. Invalid values or missing mandatory keys will trigger a SlickException.

    path

    The path in the configuration file for the database configuration (e.g. foo.bar would find a database URL at config key foo.bar.url) or an empty string for the top level of the Config object.

    config

    The Config object to read from. This defaults to the global app config (e.g. in application.conf at the root of the class path) if not specified.

    driver

    An optional JDBC driver to call directly. If this is set to a non-null value, the driver key from the configuration is ignored. The default is to use the standard lookup mechanism. The explicit driver may not be supported by all connection pools (in particular, the default HikariCPJdbcDataSource).

    classLoader

    The ClassLoader to use to load any custom classes from. The default is to try the context ClassLoader first and fall back to Slick's ClassLoader.

  15. def forDataSource(ds: DataSource, maxConnections: Option[Int], executor: AsyncExecutor = AsyncExecutor.default(), keepAliveConnection: Boolean = false): JdbcDatabaseDef

    Create a Database based on a DataSource.

    Create a Database based on a DataSource.

    ds

    The DataSource to use.

    maxConnections

    The maximum number of connections that the DataSource can provide. This is necessary to prevent deadlocks when scheduling database actions. Use None if there is no hard limit.

    executor

    The AsyncExecutor for scheduling database actions.

    keepAliveConnection

    If this is set to true, one extra connection will be opened as soon as the database is accessed for the first time, and kept open until close() is called. This is useful for named in-memory databases in test environments.

  16. def forDriver(driver: Driver, url: String, user: String = null, password: String = null, prop: Properties = null, executor: AsyncExecutor = AsyncExecutor.default()): JdbcDatabaseDef

    Create a Database that directly uses a Driver to open new connections.

    Create a Database that directly uses a Driver to open new connections. This is needed to open a JDBC URL with a driver that was not loaded by the system ClassLoader.

  17. def forName(name: String, maxConnections: Option[Int], executor: AsyncExecutor = null): JdbcDatabaseDef

    Create a Database based on the JNDI name of a DataSource.

    Create a Database based on the JNDI name of a DataSource.

    NOTE: this method will return a Slick JdbcDatabaseDef configured to use the named javax.sql.DataSource and the passed slick.util.AsyncExecutor. Calling this method more then once for the same javax.sql.DataSource name, will result in different JdbcDatabaseDefs configured with different slick.util.AsyncExecutors but backed by the same javax.sql.DataSource. This is probably not what you want. Therefore, it's recommended to call it only once and re-use the returned JdbcDatabaseDef whenever needed. Each javax.sql.DataSource should be associated with only one slick.util.AsyncExecutor.

    name

    The name of the DataSource to use.

    maxConnections

    The maximum number of connections that the DataSource can provide. This is necessary to prevent deadlocks when scheduling database actions. Use None if there is no hard limit.

    executor

    The AsyncExecutor for scheduling database actions.

  18. def forSource(source: JdbcDataSource, executor: AsyncExecutor = AsyncExecutor.default()): JdbcDatabaseDef

    Create a Database based on a JdbcDataSource.

  19. def forURL(url: String, prop: Map[String, String]): JdbcDatabaseDef

    Create a Database that uses the DriverManager to open new connections.

  20. def forURL(url: String, user: String = null, password: String = null, prop: Properties = null, driver: String = null, executor: AsyncExecutor = AsyncExecutor.default(), keepAliveConnection: Boolean = false, classLoader: ClassLoader = ClassLoaderUtil.defaultClassLoader): JdbcDatabaseDef

    Create a Database that uses the DriverManager to open new connections.

  21. final def getClass(): Class[_ <: AnyRef]
    Definition Classes
    AnyRef → Any
    Annotations
    @HotSpotIntrinsicCandidate() @native()
  22. def hashCode(): Int
    Definition Classes
    AnyRef → Any
    Annotations
    @HotSpotIntrinsicCandidate() @native()
  23. final def isInstanceOf[T0]: Boolean
    Definition Classes
    Any
  24. final def ne(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  25. final def notify(): Unit
    Definition Classes
    AnyRef
    Annotations
    @HotSpotIntrinsicCandidate() @native()
  26. final def notifyAll(): Unit
    Definition Classes
    AnyRef
    Annotations
    @HotSpotIntrinsicCandidate() @native()
  27. final def synchronized[T0](arg0: => T0): T0
    Definition Classes
    AnyRef
  28. def toString(): String
    Definition Classes
    AnyRef → Any
  29. final def wait(arg0: Long, arg1: Int): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException])
  30. final def wait(arg0: Long): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException]) @native()
  31. final def wait(): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException])

Deprecated Value Members

  1. def finalize(): Unit
    Attributes
    protected[lang]
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.Throwable]) @Deprecated
    Deprecated

    (Since version 9)

  2. def formatted(fmtstr: String): String
    Implicit
    This member is added by an implicit conversion from DatabaseFactoryDef toStringFormat[DatabaseFactoryDef] performed by method StringFormat in scala.Predef.
    Definition Classes
    StringFormat
    Annotations
    @deprecated @inline()
    Deprecated

    (Since version 2.12.16) Use formatString.format(value) instead of value.formatted(formatString), or use the f"" string interpolator. In Java 15 and later, formatted resolves to the new method in String which has reversed parameters.

  3. def [B](y: B): (DatabaseFactoryDef, B)
    Implicit
    This member is added by an implicit conversion from DatabaseFactoryDef toArrowAssoc[DatabaseFactoryDef] performed by method ArrowAssoc in scala.Predef.
    Definition Classes
    ArrowAssoc
    Annotations
    @deprecated
    Deprecated

    (Since version 2.13.0) Use -> instead. If you still wish to display it as one character, consider using a font with programming ligatures such as Fira Code.

Inherited from AnyRef

Inherited from Any

Inherited by implicit conversion any2stringadd fromDatabaseFactoryDef to any2stringadd[DatabaseFactoryDef]

Inherited by implicit conversion StringFormat fromDatabaseFactoryDef to StringFormat[DatabaseFactoryDef]

Inherited by implicit conversion Ensuring fromDatabaseFactoryDef to Ensuring[DatabaseFactoryDef]

Inherited by implicit conversion ArrowAssoc fromDatabaseFactoryDef to ArrowAssoc[DatabaseFactoryDef]

Ungrouped